Introduction of the C&Z shape automatical interchange line
C&Z l interchange line can produce any specifications of the C&Z profiles( during the width 100~300), no need changing any parts of the machine. It takes 15~30 minutes to change C shape to Z shape.
And the cutomer can change the specifications from100~300mm automatically on PLC control system.
No need change cutting blades when changing specifications.
Components of the machine
3 ton manual un-coiler
Guiding rollers
Leveling rollers
Main roll former
Adjusting rollers
Hydraulic cutting
PLC Control system
Run out table
Main parameter
a) Suitable material: GI with thickness 1.0~3.0mm
b)Specification of the finished product:
C purlin: Specification 100~300mm ; thickness 1.0~3.0mm
Z purlin: Specification 100~300mm; thickness 1.0~3.0mm
c) Forming speed: 15meters/min
d) Forming steps: 20 stations
Levelling rollers: 7 rollers
e) Roller Material: GCr15 with heattreatment.
f) Shaft material: 45# steel with tempered.(Dia: 85mm)
g) Main machine motor power: 15KW
h)Punching: Hydraulic punching after forming before cutting .
i) Cutting: Hydraulic cutting after forming
j) Hydraulic power: 5.5KW
k) Punching die is moveable to be suitable for all the specifications.
l) Cutting blade material: Cr12Mov
m)The whole line is controlled by PLC control system, work automatically.
The production process
3 ton manual un-coiler—→guiding roller—→7 pcs leveling rollers —→ Main roll former—→ Adjusting device—→Hydraulic punching and cutting —→Run out table